Customized Brake electric electromotor are in stock made in China

Introduction:

 

  1. Thebrake electric electromotor has an artificial release mechanism and is widely used in various mechanical devices and transmissions that require fast stopping and accurate positioning.

 

brake electric electromotor
  1. The DC disc brake of the brake electric electromotor is mounted on the end cap of the non-shaft end of the motor. When the brake motor is plugged into the power supply, the brakes also work. Due to the electromagnetic attraction, the electromagnet attracts the armature and compresses the spring, the brake disc is disengaged from the armature end cap, and the motor starts to run.

 

  1. The brake electric electromotoris a derivative system consisting of a DC electromagnetic brake between the rear end cover of the Y series (ip44) motor and the fan. The braking method is the power-off braking. The power level of the series of motors corresponds to the installation size. , installation size, installation type, insulation grade, use conditions, working mode, cooling method, rated voltage and rated frequency, etc.
    brake electric electromotor

 

Continue reading

Variable speed motor reducer supplier and Customized electromotor brands

Introduction:

 

  1. Variable speed motor reducer are devices that convert electrical energy into mechanical energy. They are made by the phenomenon that the energized coil is forced to rotate in the magnetic field. They are distributed to various users. The electric motor is divided into DC motor and AC motor according to the power source used. Most of the motors in the motor are AC motors, which can be synchronous motors or asynchronous motors (the motor stator magnetic field speed and the rotor rotation speed are not kept at the same speed).
    variable speed motor reducer

 

  1. The variable speed motor reduceris mainly composed of a stator and a rotor. The direction in which the energized conductor is forced to move in the magnetic field is related to the direction of the current and the direction of the magnetic induction line (the direction of the magnetic field). The working principle of the motor is that the magnetic field acts on the current to force the motor to rotate.
    variable speed motor reducer

 

  1. Variable speed motor reducercan provide a wide range of power, from milliwatts to 10,000 kW. The use and control of the motor is very convenient, and it has the ability of self-starting, accelerating, braking, reversing, slamming, etc., to meet various operational requirements.

 

Continue reading

Hardened surface reducer ZLYJ375 Plastic extrusion machinery gearbox

  1. Product details

Category: Gear Reducers     Gear Type: Plastic extrusion machinery gearbox

Installation form: Vertical layout      form: coaxial

Tooth surface hardness: Hard tooth surface      Uses: Reducer

Brand: Sogears Brand     Model: ZLYJ375

Input speed: 1000 (rpm)      Rated power: 200 (kw)

Continue reading

Industry Three phase AC Induction Brake Electric Motor for Filter Press

The filter press with Industry Three phase AC Induction Brake Electric Motor uses a special filter medium to apply a certain pressure to the object, so that a mechanical device that oozes out the liquid is a commonly used solid-liquid separation device. It was used in chemical production in the early 18th century and is still widely used in chemical, pharmaceutical, metallurgical, dye, food, brewing, ceramics and environmental protection industries.

Industry Three phase AC Induction Brake Electric Motor

working principle:

The hydraulic compression mechanism of the filter press with Industry Three phase AC Induction Brake Electric Motor consists of a hydraulic station, a cylinder, a piston, a piston rod, and a Hafland card hydraulic station connected to the pressure plate. The motor, the oil pump and the relief valve are adjusted. Valves, pressure gauges, oil circuits, fuel tanks.

Filtration method: The flow of the filtrate is clearly divided into flow filtration and dark flow filtration. For the clear flow filtration, a water nozzle is arranged on the lower liquid outlet of each filter plate, and the filtrate flows out intuitively from the water nozzle. Under the dark flow filtration, a liquid outlet hole is arranged below each filter plate, and the liquid outlet holes of the plurality of filter plates are connected into one liquid outlet passage, which is discharged by a pipe connected by the liquid outlet hole below the thrust plate.

Washing method: When the filter cake needs to be washed, it sometimes flows in one-way washing and two-way washing, undercurrent one-way washing and two-way washing.

Continue reading

YGP Series Roller Track Frequency Control Electric Motor

YGP series roller track frequency control electric motor,a new generation of high-reliability roller motor for frequency conversion has the advantages of small size, light weight, good performance, reliable use and convenient maintenance. Its comprehensive technical indicators have reached the international advanced level of similar products. YGP series roller track frequency control electric motor is suitable for continuous or intermittent operation under severe conditions such as frequent braking, forward and reverse rotation, reverse braking, etc. It has large speed regulation range and overload capability, and has high machinery. The strength is a frequency conversion special motor for the roller conveyor of the metallurgical industry, and can also be used for other similar mechanical equipment.

YGP series roller track frequency control electric motor

  The rated voltage of YGP series roller track frequency control electric motor is 380V. It can determine the optimal value of YGP motor's rated frequency according to the actual required speed range. It has wide speed range, low vibration and low noise. It can be used with various frequency conversion devices at home and abroad. Matching. The frequency conversion range is from 0 to 120 Hz; the rated frequency is below constant torque speed regulation; above the rated frequency is constant power speed regulation. Suitable for V/F control, slip angle frequency control and vector control. When used for vector control, if the user needs parameters in the equivalent circuit as shown in Figure 1, our company can provide it separately, and this sample is no longer listed.

YGP series roller track frequency control electric motors insulation grade is F grade or H grade; protection grade IP54; installation structure type is B3 (frame size 112~400), B5 (frame size 112~250), B35 (frame size 112~250); The cooling method is IC410; the motor with frame number 200 and above has a non-stop oil filling structure, which can be used for oil injection without stopping the machine, which lengthens the maintenance cycle and improves work efficiency.

YGP series roller track frequency control electric motor

YGP series roller track frequency control electric motors installation and disassembly inspection motor Note:

  1. See the random documents and nameplate for the basic electrical performance parameters of the motor. The installation dimensions, motor main circuit and auxiliary equipment interface data can be seen in the motor outline drawing and the wiring indication diagram on the motor junction box cover.
  2. When the motor is immersed in paint and assembled, the insulating paint or dirt attached to the explosion-proof surface should be cleaned. It should not be scratched with hard objects such as iron sheets, but it can be ground with oil stone.
  3. The YGP series roller track frequency control electric motorshould be stored in a clean, dry place and covered (waterproof, dustproof, anti-corrosive gas, etc.): If the storage place is cold, humid or subjected to severe temperature changes, the motor winding temperature should be kept higher than the ambient temperature. 5 ° C higher than to prevent condensation and moisture absorption.
  4. The motor foot surface must be placed on a steel gasket or backing plate. The top surface of the steel gasket or backing plate must form a horizontal plane with an elevation slightly lower than the maximum dimension from the centerline of the motor shaft to the maximum dimension of the foot surface. Before placing the underframe or bottom plate on the concrete foundation, the foundation should be The top surface is roughened and rinsed clean
  5. When disassembling the motor, first remove the hood and fan, then use the casing wrench to remove the bolts of the end cover and the bearing cover, and then use the log or copper rod to axially impact the shaft extension to separate the end cover from the base. Finally remove the rotor. Remove parts, the explosion-proof surface should be placed upside down, and covered with rubber or cloth pad, fastening bolts, spring pads, etc., do not lose.

 

Continue reading

Buy transmission gear reductor drive Made In China in stock

  1. Brief Description

The difference between a transmission gear reductor drive (Continuously VariableTransmission) and a Continuously VariableTransmission is that the Continuously VariableTransmission ratio is not a continuous point, but a continuous series of values, for example, Continuously changing from 3.455 to 0.85.

transmission gear reductor drive

 

Transmission gear reductor drive structure than the traditional transmission is simple, smaller size, it neither manual transmission of many gear pairs, nor automatic transmission complex planetary gear set, it is mainly by the main, driven wheel and metal to achieve stepless change in speed ratio.

 

  1. Classification type description

The principle is the same as the ordinary Transmission gear reductor drive size of several sets of gears under the control of the opening and closing, forming different speed ratio, like a bicycle pedal by the size of the wheel wheel and chain drive wheel rotation at different speeds. Due to the different strength of each group of gears to produce different thrust size, resulting in the gearbox output speed also changes accordingly, so as to achieve all grades of slow rotation.

Continue reading

Low price motor reducer Price List quotation 2 years warranty

  1. Brief Description

ZD wholesale motor reducer is an external involute cylindrical gear reducer produced according to the national professional standard ZBJ19004. The gear reducer is widely used in metallurgy, mining, lifting, transportation, cement, construction, chemical industry, textile, printing and dyeing, pharmaceutical and other fields.

 

ZD wholesale motor reducer structure than the traditional transmission is simple, smaller size, it neither manual transmission of many gear pairs, nor automatic transmission complex planetary gear set, it is mainly by the main, driven wheel and metal to achieve stepless change in speed ratio.

ZD wholesale motor reducer

 

  1. Classification type description
  2. The ZD wholesale motor reduceris made of high strength and low carbon alloy steel through carburizing and quenching. The tooth surface hardness is up to hrc58-62.
  3. HighZD wholesale motor reducer rate: single stage greater than 96.5%, double stage greater than 93%, tertiary greater than 90%.

Smooth operation and low noise.

Continue reading

New gear box WB series miniature cycloidal pinwheel reducer with high quality

Introduction:

 

  1. The WB series miniature cycloidal pinwheel reducer are all lubricated with grease, which is not easy to leak oil. Users can install and use them at any angle and direction as needed.

 

miniature cycloidal pinwheel reducer
  1. WB series miniature cycloidal pinwheel reducer is a kind of machine that realizes deceleration according to the principle of less tooth difference planetary transmission and cycloidal pin gear meshing. The machine is divided into horizontal, vertical, double-axis and direct-coupled assembly methods, which are the first choice for metallurgy, mining, construction, chemical, textile, light industry and other industries.

 

  1. Our WB series cycloid reduceradopts high speed ratio and high efficiency single-stage transmission, which can achieve a reduction ratio of 1:87, and the efficiency is over 90%. If multi-stage transmission is adopted, the reduction ratio is larger.
    miniature cycloidal pinwheel reducer

 

Continue reading

China manufacture generator with high quality and good price

Introduction:

 

  1. China manufacture generatoris a mechanical device that converts other forms of energy into electrical energy. It is driven by a water turbine, a steam turbine, a diesel engine, or other power machinery to convert the energy generated by water flow, gas flow, fuel combustion, or nuclear fission into mechanical energy that is transmitted to the generator. It is then converted to electrical energy by a generator.

 

china manufacture generator
  1. The general principle of china manufacture generatorconstruction is to construct magnetic circuits and circuits that are electromagnetically induced with each other with appropriate magnetically conductive and conductive materials to generate electromagnetic power for energy conversion purposes.

 

China manufacture generator main structure:

Continue reading

WP series worm gear reducer features and precautions, gearbox reducer in stock

  1. Overview:

WP worm gearbox reducer in stock is developed on the basis of WD reducer. The worm is made of 45# high-quality steel by heat treatment. The worm wheel is made of tin bronze. The wear resistance is good, especially in the bearing capacity. The worm gearbox reducer in stock is mainly used for the reduction transmission of various mechanical equipments such as plastics, metallurgy, beverages, mining, lifting and transportation, and chemical construction.

gearbox reducer in stock

 

  1. Performance characteristics:
  2. The transmission is stable, the vibration, impact and noise are small, the reduction ratio is large, the versatility is wide, and it can be used with various mechanical equipments.

2, can get a larger transmission ratio with a single-stage transmission, compact structure, most models of the reducer have better self-locking, can save the brake device for mechanical equipment with braking requirements

  1. The meshing friction loss of the worm screw tooth and the worm gear tooth surface is large, so the transmission efficiency is lower than the gear, easy to heat and high temperature.
  2. Higher requirements for lubrication and cooling.

5, good interoperability, worm gears are manufactured according to national standards, bearings, oil seals, etc. are used standard parts.

6, the box type has a basic type (the box is a vertical or horizontal structure with a foot plate) and a universal type (the box is a rectangular parallelepiped, with multiple fixed holes, no bottom plate or another bottom) Various types of structure such as foot board)

Continue reading

MB-mechanical stepless speed changer gearbox gearmotor free sample

  1. Overview:

The structure of MB-mechanical continuously variable transmission gearbox gearmotor free sample is mainly composed of compacted driving wheel device, friction transmission mechanism and speed control mechanism, so it is favored by customers.

Gearbox gearmotor free sample

 

The working principle of the gearbox gearmotor free sample: the tapered driving wheel and the pressure plate are pressed by a set of disc springs, and the input shaft and the driving wheel are keyed to form a pressing active device. The friction wheel rotates while rotating, and drives the planet carrier to rotate through the central axis of the planetary friction wheel and the slider bearing. While turning the hand wheel to drive the speed control cam to change the angular position, the end face curve of the speed control cam acts on the end face curve of the plane pin and the fixed cam, so that the speed control cam generates axial movement, thereby uniformly changing the speed control cam and fixing The spacing between the rings causes the tapered planetary friction wheel to move radially. Finally, the working radius of the friction between the planetary friction wheel and the driving wheel, the pressure plate and the fixed ring, and the speed regulating cam is uniformly changed to achieve stable stepless speed change.

 

Due to the convenient design and stable transmission structure of the continuously variable transmission gearbox gearmotor free sample, it is widely used in food machinery, printing, papermaking machinery, rubber, plastic machinery, ceramic machinery, pharmaceutical machinery and various working production lines. In the case of continuous changes in speed and speed, it also has the best working speed for exploring the machine during the trial production of new products.gearbox gearmotor free sample

Continue reading

How to reduce motor speed with pulleys

How to reduce motor speed with pulleys

1: servo motor
Servo motors are widely used in various control systems to convert the input voltage signal into mechanical output on the motor shaft and drag the controlled components to achieve control purposes.
The servo motor has DC and AC. How to reduce motor speed with pulleysThe earliest servo motor is a general DC motor. How to reduce motor speed with pulleysWhen the control accuracy is not high, the general DC motor is used as the servo motor. The current DC servo motor is structurally a low-power DC motor whose excitation uses armature control and magnetic field control but usually uses armature control.


2: stepper motor
The stepping motor is mainly used in the field of CNC machine tool manufacturing. How to reduce motor speed with pulleysSince the stepping motor does not require A/D conversion, it can directly convert the digital pulse signal into angular displacement, so it has been considered as the most ideal CNC machine tool actuator.
In addition to its application on CNC machines, stepper motors can also be used on other machines, such as motors in automatic feeders, as general-purpose floppy disk drives, as well as in printers and plotters.


3: Torque motor
Torque motors are characterized by low speed and high torque.How to reduce motor speed with pulleys AC torque motors are commonly used in the textile industry, and their working principle and structure are the same as those of single-phase asynchronous motors.
4: Switched reluctance motor
Switched reluctance motor is a new type of speed-regulating motor. How to reduce motor speed with pulleysIts structure is extremely simple and sturdy, its cost is low, and its speed regulation performance is excellent. It is a strong competitor of traditional control motors and has strong market potential.
5: Brushless DC motor
The brushless DC motor has good linearity of mechanical characteristics and adjustment characteristics, wide speed regulation range, long life, easy maintenance and low noise.How to reduce motor speed with pulleys There is no series of problems caused by brushes, so this kind of motor has very much in the control system. Big application.


6: DC motor
DC motors have the advantages of good speed regulation performance, easy starting, and ability to load and start. How to reduce motor speed with pulleysTherefore, the application of DC motors is still widely used, especially after the emergence of thyristor DC power supplies.
7: Asynchronous motor
The asynchronous motor has the advantages of simple structure, convenient manufacture, use and maintenance, reliable operation, low quality and low cost. How to reduce motor speed with pulleysAsynchronous motors are widely used in driving machine tools, water pumps, blowers, compressors, lifting and hoisting equipment, mining machinery, light industrial machinery, agricultural and sideline products processing machinery, and other industrial and agricultural production machinery, as well as household appliances and medical equipment.
It is widely used in household appliances, such as electric fans, refrigerators, air conditioners, vacuum cleaners, etc.
8: Synchronous motor
Synchronous motors are mainly used in large machines such as blowers, pumps, ball mills, compressors, rolling mills, and small and micro-instrumentation equipment or as control elements. How to reduce motor speed with pulleysAmong them, the three-phase synchronous motor is its main body. In addition, it can be used as a camera to deliver inductive or capacitive reactive power to the grid.

Continue reading

Contact Us Now!

NER GROUP CO.,LIMITED

Yantai Bonway Manufacturer Co., Ltd

Tel:+86-535-6330966

Mobile:+86-18563806647

Whatsapp/Wechat: 008618563806647

https://twitter.com/gearboxmotor

https://www.facebook.com/sogears1993

https://www.youtube.com/c/Gearmotors

E-mail:inquiry@sogears.com; Skype ID: qingdao411

Industrial gearbox manufacturer in China

As a Industrial gearbox manufacturer in China, We offer the international standard high quality gear speed reducer and reduction gearbox who has the big stock house to guarantee the prompt delivery Depending on the professional industry field solution, excellent industry field achievement and the leading technology application in Hoist&Crane, Sugar&Paper, Coal&Mining, Rubber&Plastic, Packing&Conveyors, Energy&Fans&Pumps, Cement&Construction, Sawmills&Wood Mills, Food&Butchering&Pharma, Chemical&Boilers&Ceramic, Recycling&Sewage disposal, Steel&Rolling Mill&Metallurgy, Textile&Ginning&Leather working and so on.