Drill Chuck & Key Timing belt & Pully Spindle & Shank 775 DC Motor Ball bearing block Bearings Fixing Bearings on block Take necessary precautions before hammering bearings (All purchase items links are in the description) Inserting Spindle in to the block And also insert spindle in to pulley Then fix shank and tighten it Now the Chuck can be inserted in the other end The Drill and shank is ready Making Frame for drill- grinder set Sliding portion Rectangular tube is Cutting and welded to another rectangular base Sliding portion is equipped for Motor and Drill set All sharp edges is to be grinded well DC Motor housing Base plate welded to Rectangle tube Operating Handle and spring for return action is provided (for more videos Please subscribe our Channel Vtip.com) Testing This motor Can support from 12V to 36V ,

if the glue has work and hold the potentio onthe shaff use a little piece flatt from pvc water pipe make a shape on the flatt pvc use a little fire to melt, so that can hold the potentio to the gearbox remove the cover gearbox now we can cut of the flat pvc and we give the limitation on the gear to around in 180 degre same with the potentio use a small pieces plastic pvc and give a little glue if all finish we put back the cover of gearbox ang put a motor dc give a little glue on the potentio holder and now we have a servo in 180 degre rotary just like standart servo now we will conecting the motor output on the modul to the motor make sure the Vcc (+) motor output on the board modul is conected on Vcc (+) motor dc and ground output to ground input look on the datasheet on the motor

Enter your text here ...