We supply Industrial Gearboxes which is widely used in major applications such as material handling equipment, conveyors, crushers, mixers & agitators, cranes and hoist, cooling towers etc., major industries covered are cement, food, steel, power plant, paper industry, Mines and minerals, and plastic and rubber industries etc. From the Gearing Arrangement, there is helical, bevel, cycloildal, worm, planetary type and so on. With big Output Torque Top to 952,000 N.m, all our gearboxes with electric motors are very well organized in terms of security and safety, complete unit organized and well planned.
We supply Industrial Gearboxes which is widely used in major applications such as material handling equipment, conveyors, crushers, mixers & agitators, cranes and hoist, cooling towers etc., major industries covered are cement, food, steel, power plant, paper industry, Mines and minerals, and plastic and rubber industries etc. From the Gearing Arrangement, there is helical, bevel, cycloildal, worm, planetary type and so on. With big Output Torque Top to 952,000 N.m, all our gearboxes with electric motors are very well organized in terms of security and safety, complete unit organized and well planned.
We supply Industrial Gearboxes which is widely used in major applications such as material handling equipment, conveyors, crushers, mixers & agitators, cranes and hoist, cooling towers etc., major industries covered are cement, food, steel, power plant, paper industry, Mines and minerals, and plastic and rubber industries etc. From the Gearing Arrangement, there is helical, bevel, cycloildal, worm, planetary type and so on. With big Output Torque Top to 952,000 N.m, all our gearboxes with electric motors are very well organized in terms of security and safety, complete unit organized and well planned.
We supply Industrial Gearboxes which is widely used in major applications such as material handling equipment, conveyors, crushers, mixers & agitators, cranes and hoist, cooling towers etc., major industries covered are cement, food, steel, power plant, paper industry, Mines and minerals, and plastic and rubber industries etc. From the Gearing Arrangement, there is helical, bevel, cycloildal, worm, planetary type and so on. With big Output Torque Top to 952,000 N.m, all our gearboxes with electric motors are very well organized in terms of security and safety, complete unit organized and well planned.
Sizes: 025 -030-040-050-063-075-090-105-110-130-150
Available versions: NMRV - fitted for motor coupling, NRV - with input shaft, NMRL - with torque limiter
Power up to 15 kW
Patented case with modern design
Aluminuium units are supplied complete with synthetic oil which allows universal position mounting, with no need to modify lubricant quantity. Moreover units without plugs reduce the risk of oil oxidation and contamination.
Reduction ratios between 5 and 100
Max torque 1.550 Nm and admissible radial loads max 16.500 N
Cases up to 105 in die-cast aluminium alloy and over 110 in G200 grey cast iron
Worm wheel: bronze Cu Sn12 Ni2 (UNI7013-10)
Ground worm profile ZI (UNI4760)
Excellent mechanical strength while being especially lightweight
Load capacity calculated to BS721-83 and verified according to Niemann
Size 030 and over are painted with RAL 5010 blue epoxy-polyester powder in accordind to DIN 1843
PC, pre-stage reduction units available for motor power up to 2,2kW and size up to 090
Worm gear reducers are available with diffferent combinations: NMRV+NMRV, NMRV+NRV, PC+NMRV
Automated manufacturing process not only guaratees fast service, but also reliability and quality
Options: torque arm, output flange, output shaft kit, cover, double extention high speed shaft
Sizes: 025 -030-040-050-063-075-090-105-110-130-150
Available versions: NMRV - fitted for motor coupling, NRV - with input shaft, NMRL - with torque limiter
Power up to 15 kW
Patented case with modern design
Aluminuium units are supplied complete with synthetic oil which allows universal position mounting, with no need to modify lubricant quantity. Moreover units without plugs reduce the risk of oil oxidation and contamination.
Reduction ratios between 5 and 100
Max torque 1.550 Nm and admissible radial loads max 16.500 N
Cases up to 105 in die-cast aluminium alloy and over 110 in G200 grey cast iron
Worm wheel: bronze Cu Sn12 Ni2 (UNI7013-10)
Ground worm profile ZI (UNI4760)
Excellent mechanical strength while being especially lightweight
Load capacity calculated to BS721-83 and verified according to Niemann
Size 030 and over are painted with RAL 5010 blue epoxy-polyester powder in accordind to DIN 1843
PC, pre-stage reduction units available for motor power up to 2,2kW and size up to 090
Worm gear reducers are available with diffferent combinations: NMRV+NMRV, NMRV+NRV, PC+NMRV
Automated manufacturing process not only guaratees fast service, but also reliability and quality
Options: torque arm, output flange, output shaft kit, cover, double extention high speed shaft
Customer Reference
The United States
Australia
Bangladesh
Brazil
Myanmar
Canada
Chile
Columbia
Denmark
Egypt
England
France
Germany
Guatemala
Holland
India
Indonesia
Iran
Japan
Kazakhstan
Kenya
Latvia
Macedonia
Malawi
Malaysia
Mexico
Mongolia
Nicaragua
Nigeria
Oman
Pakistan
Panama
Peru
Philippines
Poland Client
Portuguesa
Qatar
Russia
Saudi Arabia
Senegal
Serbia
Singapore
South Africa
Spain
Sri Lanka
Tanzania
Thailand
Turkey
Vietnam
Yemen
November 1, in the effort with group purchasing and quality assurance departments, under the careful development and manufacturing of a lean manufacturing technology sector, the country's two new revision ZLYJ173 Mao and ZLYJ200 prototype, once developed. Older contrast, the new revision of these two ZLYJ series gear reducers products, mainly significant breakthrough following five aspects -
First, the original wooden box mold mold, all replaced by a new design of the mold. Mold has three advantages: 1, casting surface is more smooth, flat, you can spray paint directly on the surface, eliminating the old original box Pihui milling and grinding processes, not only shorten the processing cycle, and improve efficiency, but also cost savings. 2 directly wooden mold easily exclude defective situation legacy foundry sand in the box in the corner. 3, according to the mechanical requirements, the new design is more compact shape, adding many rounded design, better thermal performance, while products are also more in line with the requirements of modern industry artistic taste.
Second, the internal high-speed shaft bearing original tapered roller bearings, replace all self-aligning roller bearings. Aligning bearings have three advantages: 1, self-aligning bearing operation more stable, longer life. 2-aligning bearing on the accuracy of axial clearance adjustment, requiring significantly lower and easier to mass production. 3, self-aligning bearing, even when the axial movement is generated, not like, like the formation of a conical taper bearing exercise, causing fatal injuries to seal. Thus, the lower the probability of oil spills.
Third, through technological innovation, high-speed level labyrinth seal cover method, a single seal structure, compared to the old conventional double seal structure, not only reduces the probability of oil spills, but also cost savings.
4. All ZLYJ225 following models, the combination of surface screws from the original studs, replace the unified hex screws. Hexagon has three advantages: 1, hex screw stud directly ruled out opening and closing boxes difficult and fragile and screw nut length protruding level of inconsistency, the disadvantage intractable. 2, the appearance of a more unified appearance, assembly efficiency improved significantly. 3, some screw models, with other GM models, reducing the material type, easier purchasing and inventory control.
Five, after a new optimized design technology sector, external lubrication pipes have such three advantages: 1, more uniform appearance of lines, modular, to eliminate the appearance of older products are not unified, greater randomness shortcomings. 2, reducing the technical requirements for piping layout, making it simple, simple, and easier to operate. 3, small machines increases the external piping type small filtering equipment, so cleaning and maintenance, easier, simpler, and improved lubrication conditions, extending the life of the equipment.
Attention:
◇ Cut off and prevent (by a warning tag, etc.) the re-connection of power supply to the motor before installing the couplings.
◇ Striking by hammer or other similar tools is not allowed when mounting the couplings and small gears onto the shaft end.
◇ Ensure the correct tension of belt when installing belt wheel.
◇ Do not install or uninstall the screw by force in respect of the output part.
VII. Fault Analysis and Solutions
Faults | Causes | Solutions | Faults |
I. Introduction
ZLYJ reducers are a kind of high-precision rigid gear assembly specially designed for the single-screw plastic/rubber extruder. Taking the JB/T 8853-2001 Cylindrical Gear Reducer as a reference for design, the products applies the high-strength low-carbon alloy steel for gears and gear shaft, with tooth flank carbureted, quenched and ground, to meet the gear precision at Level 6 (GB/T 10095) and hardness of tooth flank HRC54~62. A huge thrust bearing is mounted on the front of the output shaft to bear the thrust from the screw.
II. Use Scope
The input rotation of prime mover shall be ≤ 1500 rpm.
The peripheral speed of gear drive shall be ≤ 20m/s.
The working ambient temperature shall be within -40℃~45℃. Preheat the lubricating oil to above 0℃ or choose the low temperature lubricating oil when the ambient temperature is below 0℃.
Note:
Rotation is available both forwards and backwards. However, the high-speed shaft of some types of reducers has a single-way oil pump directing as defaulted to the output shaft which rotates clockwise.
III. Reducer Types
Product nameplates: When delivered, all reducers are attached with nameplates to specify the type, capability, production date, ex-factory number and other features for the purpose of maintenance, which shall not be removed at random.
Nameplate explanation:
ZLYJ |
Recently, from the year 2013 standard committee cyclo gear reducer standard triage was informed Cycloid Drive Part 1 Basic terminology GB / T10107.1--2012, Cycloid Drive Part 2 illustrates a method GB /T10107.2--2012, Cycloid Drive Part 1 Symbols of geometrical GB / T10107.3--2012 three new national standards and other gear, Publicizing officially released at the meeting. The meeting will also review by the cycloidal reducer, the newly revised standard 11 CVT gearbox, worm gear and test methods to detect and five standard method; Mechanical Science Research Institute Certification Center Jinzhu Ren made About EMS / OHSMS24001 / 28001-2011 standard Publicizing; Scientific Research Institute of China China Industrial Productivity Promotion Center Jinwu Wang, director of the current slowdown in the industry standard status quo and revision of standards explained; Standardization Administration of China Mechanical Science Research Institute Director at the road by the forest significance and the role of standardization in the national production, made an important speech.
In addition, the meeting identified 2014 annual work plan: 1. Call GB, line marked project proposals for standard age more than five years of standard revise, improve standards of level, a joint venture to study and explore reducer standard upgrade gradually to improve the technical level and quality of products to the world level; 2, organized and completed six industry standards revision; 3, the organization completed an industry standard-setting work, and so on.
At the meeting, the machinery industry by gearbox standard committee said it would strive to provide more services in product standards and product quality improvement, etc., to advance the cause of our country by gearbox standardized by leaps and bounds, creating standardization situation, and make greater contribution.
Attachment: 2013 standards by 11 standard committee is triage planet cone ring CVT, mechanical transmission test methods, multi-disc CVT, continuously variable transmission cone ring disc, cycloid reducer double cycloid reducer, cycloid reducer carrying capacity and transmission efficiency measurement method, cycloid reducer Determination of cleanliness, cycloid reducer temperature measurement method, cycloid Noise measurement method, WP series worm gear reducer; by five methodological standards in 2013 marked the Mixed Commission is cycloid reducer carrying capacity and transmission efficiency measurement method, cycloid reducer cleanliness measurement method cycloid reducer temperature measurement method, machine noise measurement method, mechanical CVT test methods cycloid.
Characteristic: This series of reducers are widely used for pitch & yaw function in wind power facility and swing function in engineering machinery.The reducers have characteristics as low noise,high capability of resisting strikes, compact sizes,long life etc.Both electric motor and hydraulic motor are available for selection by considering the users’ working system. And the output opinion is also customized for different usage.
Flange mounted
Output shaft: splined or with integral pinion
Rugged construction
High torque capacity
Output shafts supported by heavy duty bearings
Applicable AC motors
Compact motors and brake motors
IEC motors and brake motors
Main Brake Motor Features
DC and AC type
Main Motor Options
Thermistors and thermostates sensor
With the rapidly changing world economy by the international economic situation, the domestic economy into the new normal. And as China's construction machinery industry basis, has been a four-year downturn. Overcapacity, insufficient market demand persists. In this market environment, "along the way" strategy proposed like a panacea, into the long-sluggish construction machinery industry.
In construction and along the domestic construction, machinery as a necessity in the process of roads, railways, airports and other infrastructure, and become an indispensable machinery. Excavators, loaders, bulldozers and other machinery products are in a big demand and will be the direct beneficiaries of the infrastructure. Engineering machinery industry began to take along all the way to the east, the momentum out to sea. Then, on the way to the sea of mechanical engineering, what are the difficulties and challenges?
On June 18, 2015, Liugong global R & D center was officially inaugurated and National Engineering Research Center for earthmoving machinery listing ceremony was held in Guangxi Liugong. It not only enhances Liugong research and development, but also will become an important milestone in the development history of Liugong. Zengguangan, who isChairman of Liugong, said that in Liugong building and investment will be without any slowdown and hesitation. Because they know that establish R & D center is not only a matter of the future of the core competitiveness of enterprises, but also related to the China's construction machinery industry morale.
Liugong's initiative is a microcosm of the whole construction machinery. As technology advances and innovative technology industry, there is a a huge progress in product development and manufacturing, from relying on technology imports to absorbed into a completely independent technological innovation, China's manufacturing industry has been rapid growed. Data shows that main share in the major overseas markets continued to rise, such as that the United States imports from China accounting for construction machinery increased from 10.08 percent in 2012 to 12.02 percent and the Asian market grew from 43% to 47% and the African market from 12% to 15%.
Studies have shown that, as in Zoomlion, Sany, XCMG, Liugong who are the construction machinery leader in technology research and development has always maintained the attitude of the times of business, have a good export performance. This is also from the side, excess capacity is relative, continuous technological innovation, to make technology products with core competitiveness, will not excess capacity.
According to the United Arab Emirates media, Abu Dhabi will joint venture with two Japanese industrial companies, The Senaat steel companies JFE and The Marubeni-Itochu to build the AlGharbia Steel Plant. With a total investment of 1.1 billion dirhams (US $ 300 million), Senaat accounts for 51% of the shares and the other two Japan companies accounts for 49% of the shares. AlGharbia Steel Plant is located in Abu Dhabi caliph industrial zone, which is expected to be finished in 2018. The annual output will be 240,000 tons, of which 40% will be exported to the country around.
As been asked about the current market situation, Senaat Daheri who is the person in charge of the company's operations, said that Steel Plant construction is based on long-term considerations, and has studied the market supplying and demand. In the Middle East, one million tons of steel is imported annually. The vice president Japan JFE Steel, said the production of Gulf oil and gas is still strong, due to the transportation needs of the oil and gas, steel demand will grow steadily.
Senaat, wholly owned by the Abu Dhabi government, whose affiliated companies, including the UAE steel, aluminum Tavira, Arkan, AlFoah so on.
The main disadvantage is that they helical gear is vibration. Whether it is due to the design, manufacture or deformation, etc., at the same time along the entire tooth surface may occur some changes involute shape. This will lead to a regular, once per tooth incentives, it is often very strong. The resulting vibration caused both large load on the gear, and cause noise. Another negative point is that the contact time, and sometimes additional strength by two pairs of meshing obtained and can not be used, because the stress is circulating in the situation of a single tooth meshing defined.
Helical gears can be seen as a group of gear misalignment sheet should be placed into the cylindrical gear, so that each piece is touching a different part of the tooth profile, resulting in the role of the compensation of each sheet gear error, the compensation due to the wheel elastic teeth and is very effective, and thus come to such a result, the error is within 10mm of teeth can make the error from the average effect, which under load conditions, can such error is within 1mm teeth as running smoothly. Because in any transient, about half the time (assuming the coincidence of about 1.5) will have two teeth mesh, which brings additional benefits in terms of strength. Therefore, the stress can be established in 1.5 times the tooth width, rather than a tooth width of the base.
Manufacturing and assembly spur a lot of flakes is both difficult and uneconomical, and therefore manufactured integral gear teeth along the helical direction of the gear. Helical gear is not as straight, it will lead to undesirable axial force. But the benefits in terms of vibration and strength far better than the disadvantage caused by the axial thrust and a slight increase in manufacturing costs brought. So use helical gear rather than straight gear reducer such as the manufacture of four series:. R series coaxial helical gear reducer, K series of spiral bevel gear reducer, S series helical worm gear reducer, F series parallel shaft helical gear reducer Note 1: What is a spur gear: Spur is parallel to the shaft of the gear teeth. We will only discuss the parallel shaft gear theory, therefore, any money perpendicular to a cross section of two gear shaft are identical.
We will have a holiday for The Labors Day from 1st to 3rd May. and will get back to work on 4th. During this time, all our sale department will have limit access to check emails or others.
Thanks for your always support.