Automatic Feeder Vertical Mounting Cyclo Speed Reducer

  1. The machine has stable single stage of bld cycloidal speed reducer and uniform feeding, so as to ensure uniform feeding of the whole machine;
  2. The feed is evenly fed through the feeding material tube through the feeding material tube, and the feed is evenly sprinkled to the trough to avoid the spillage of the artificial feeding and save the feed;

3, saving labor, the machine is a single feeding, running 5-8 minutes (70 meters chicken house)

Composition:

  1. Horizontal conveyor auger.

2, the hopper.

  1. Control the electric box.
  2. Walking mechanism.
  3. Speed regulating motor and walking geared motor.

6, feeding auger motor.

7, feeder bracket.

  1. Lifting and conveying auger.
    vertical mounting cyclo speed reducer
    vertical mounting cyclo speed reducer

Maintenance

1.When the feeder is in motion, it is best not to put things on it. In this case, the pressure on the totally Enclosed Fan Cooled single phase motor is too high and the asynchronous motor is burned out.

2.check if the belt is intact and there is looseness. The feeding machine transports the material by the leather belt. Only when the belt is normal can the full performance of the machine be fully utilized and the working capacity can be maximized.

3.because the various parts of the feeder are connected by gears and chains, it is necessary to ensure the maximum lubrication of the gears and chains, so that the machine will not be damaged due to lack of lubrication.

vertical mounting cyclo speed reducer
vertical mounting cyclo speed reducer
  1. Because of the large amount of dust generated during the production of the feed, a large amount of dust will accumulate in the control box of the feeder. The dust will short-circuit the internal circuit and damage the electrical circuit and other components, so it should be cleaned at intervals. Look at the dust in the control box.

5.The main power of the feeder is the motor,(because the motor speed is very high, it is necessary to use a double-shaft cycloidal speed reducer to reduce the speed when transmitting power). Check if vertical mounting cyclo speed reducer is abnormal at the time of use. The motor should be maintained in a timely manner, such as: adding gear oil to the gear of the reducer.

 

 

With Best Regards,

Cherry Zhang ( Sales Department; Miss. )  

NER GROUP CO.,LIMITED

Yantai Bonway Manufacturer Co., Ltd                                     

Tel:+86-535-6330966

Mobile:+86-18865558975

http://www.bonwaygroup.com

https://twitter.com/gearboxmotor

https://www.facebook.com/ner.sogears.1

Viber/Line/Whatsapp/Wechat: 008618865558975  

E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.; Skepy ID:cherry_3053

Add:No.5 Wanshoushan Road Yantai city Shandong Province, China