Slide rails for motor sizes 280 - 400

Accessories

Slide rails for motor sizes 280 - 400

Slide rails for motor sizes 280 - 315

Slide rails for motor sizes 355 - 400

Note: Slide rails that do not fulfill the DIN standard are available for motor size 450 on request.

A set of slide rails includes two complete rails with screws for mounting the motor on the rails. Screws for mounting the rails on the foundation are not included. Slide rails have unmachined lower surfaces and should be supported in a suitable manner before tightening down.

Slide rails can be ordered with article numbers shown in the table.

Motor                             Bolts Horizontal Weight
size Article no. l1 l2 l3 a h b1 b2 c d e1 e2 e3 e4 to feet bolts kg/2 pc
280 3GZF334730-55 800 600 900 16 75 100 120 35 28 100 100 200 165 M20x90 M24x300 50
315 3GZF334730-56 1000 720 1100 16 80 120 140 40 28 140 140 240 190 M24x100 M24x300 80
355 - 400 3GZF334730-57 1250 485 1350 16 80 120 140 35 28 140 140 240 190 M24x100 M24x300 90

 Motors in brief

Cast iron motors, sizes 71 - 132

Motor size   71 80 90 100 112 132
Stator and end shields Material Cast iron          
  Paint color shade Munsell blue 8B 4.5/3.25          
  Corrosion class C3 (medium)          
Feet   Integrated cast iron feet          
Bearings D-end 6203-2Z/C3 6204-2Z/C3 6205-2Z/C3 6206-2Z/C3 6206-2Z/C 6208-2Z/C3
  N-end 6202-2Z/C3 6203-2Z/C3 6204-2Z/C3 6205-2Z/C3 6205-2Z/C3 *) 6208-2Z/C3
Axially locked bearings   Locked at D-end          
Bearing seals D-end V-ring          
  N-end Labyrinth seal in IE2, V-ring in IE3          
Lubrication   Permanently lubricated shielded bearings          
Measuring nipples for   Not included          
condition monitoring of              
the bearings              
Rating plate Material Stainless steel          
Terminal box Frame and cover Cast iron          
  Corrosion class C3 (medium)          
  Cover screws Zinc-electroplated steel          
Connections Threaded openings 2xM16 2xM25 2xM25      
  Terminals 6 terminals for connection with cable lugs (not included)          
  Cable glands Cable flange included, glands as option          
Fan Material Glass-fiber reinforced polypropylene          
Fan cover Material Steel          
  Paint color shade Munsell blue 8B 4.5/3.25          
  Corrosion class C3 (medium)          
Stator winding Material Copper          
  Insulation Insulation class F. Temperature rise class B unless otherwise stated.          
  Winding protection 3 PTC thermistors, 150 °C          
Rotor winding Material Pressure die-cast aluminum          
Balancing method   Half-key balancing as standard          
Keyway   Closed keyway          
Drain holes   Drain holes with closable plastic plugs, open on delivery          
Enclosure   IP 55          
Cooling method   IC 411          

 *) 6206-2Z/C3 in IE3

Motors in brief

Cast iron motors, sizes 160 - 250

Motor size   160 180 200 225 250
Stator and end shields Material Cast iron        
  Paint color shade Munsell blue 8B 4.5/3.25        
  Corrosion class C3 (medium)        
Feet Material Integrated cast iron feet, bolted feet when terminal box on LHS/RHS        
Bearings D-end 6309/C3 6310/C3 6312/C3 6313/C3 6315/C3
  N-end 6209/C3 6209/C3 6210/C3 6212/C3 6213/C3
Axially locked bearings   Locked at D-end        
Bearing seals D-end Gamma-ring        
  N-end Gamma-ring        
Lubrication   Regreasable bearings, regreasing nipples M6x1        
Measuring nipples for   Included        
condition monitoring of            
the bearings            
Rating plate Material Stainless steel        
Terminal box Frame and cover Cast iron        
  Corrosion class C3 (medium)        
  Cover screws Zinc-electroplated steel        
Connections Cable entries 2xM40, 2xM20   2xM63, 2xM20    
  Terminals 6 terminals for connection with cable lugs (not included)        
  Cable glands Cable flange included, glands as option        
Fan Material Glass-fiber reinforced polypropylene        
Fan cover Material Steel        
  Paint color shade Munsell blue 8B 4.5/3.25        
  Corrosion class C3 (medium)        
Stator winding Material Copper        
  Insulation Insulation class F. Temperature rise class B unless otherwise stated.        
  Winding protection 3 PTC thermistors, 150 °C        
Rotor winding Material Pressure die-cast aluminum        
Balancing method   Half-key balancing as standard        
Keyway   Closed keyway        
Drain holes   Drain holes with closable plastic plugs, open on delivery        
Enclosure   IP 55        
Cooling method   IC 411        

 Motors in brief

Cast iron motors, sizes 280 - 450

 

Motor size     280 315 355 400 450
Stator and end shields Material Cast iron          
  Paint color shade Munsell blue 8B 4.5/3.25          
  Corrosion class C3 (medium)          
Feet Material Integrated cast iron feet          
Bearings D-end 2-pole 6316/C3 6316/C3 6316M/C3 6317M/C3 6317M/C3
    4-12-pole 6316/C3 6319/C3 6322/C3 6324/C3 6326M/C3
  N-end 2-pole 6316/C3 6316/C3 6316M/C3 6317M/C3 6317M/C3
    4-12-pole 6316/C3 6316/C3 6316/C3 6319/C3 6322/C3
Axially locked bearings   Locked at D-end          
Bearing seals D-end V-ring or labyrinth seal          
  N-end V-ring or labyrinth seal          
Lubrication   Regreasable bearings, regreasing nipples M10x1          
Measuring nipples for   Included          
condition monitoring of              
the bearings              
Rating plate Material Stainless steel          
Terminal box Frame and cover Cast iron         Cover steel
  Corrosion class C3 (medium)         Steel
  Cover screws Zinc-electroplated steel          
Connections Cable  2-4-pole 2xM63+2xM20 2xM63, 2xØ48- 2xØ48-60, 60-80, 2xØ60-80 (2-6-pole) 2xM2+0
  entries     60+2xM20 2xM20   2xØ60-80, 2xM20
    6-8-pole     2xØ32-49, 48-60, 2xØ48-60 (8-pole),  
          2M20 2xM20  
        See section Standard terminal box for detailed information.      
  Terminals   6 terminals for connection with cable lugs (not included)        
  Cable glands   Cable flange, glands as option        
Fan Material Glass-fiber reinforced polypropylene          
Fan cover Material Steel          
  Paint color shade Munsell blue 8B 4.5/3.25          
  Corrosion class C3 (medium)          
Stator winding Material Copper          
  Insulation Insulation class F. Temperature rise class B unless otherwise stated          
  Winding protection 3 PTC thermistors, 155 °C          
Rotor winding Material   Pressure die-cast aluminum        
Balancing method     Half-key balancing        
Keyway     Open keyway        
Drain holes     Drain holes with closable plastic plugs, open on delivery        
Enclosure     IP 55        
Cooling method     IC 411        

 Motor construction

Exploded view, frame size 315

1 Stator frame

2 End shield, D-end

3 Screws for end shield, D-end

V-ring in 4-8 pole motors

4 End shield, N-end

5 Screws for end shield, N-end

6 Rotor with shaft

7 Key, D-end

8 Terminal box

9 Terminal board

10 Intermediate flange

11 Screws for terminal box cover

12 Outer bearing cover, D-end

13 Valve disc with labyrinth seal, D-end; standard in 2-pole motors,

14 Bearing, D-end

15 Inner bearing cover, D-end

16 Screws for bearing cover

17 Outer bearing cover, N-end

18 Seal, N-end

19 Wave spring

20 Valve disc, N-end

21 Bearing, N-end

22 Inner bearing cover, N-end

23 Screws for bearing cover

24 Fan

25 Fan cover

26 Screws for fan cover

27 Rating plate

28 Lubrication plate

29 Grease nipple, D-end

30 Grease nipple, N-end

31 SPM nipple, D-end

32 SPM nipple, N-end

Total product offering

Motors, generators and mechanical power transmission products with a complete portfolio of services

IEC motors

– Low voltage motors

– High voltage induction and synchronous motors

– Marine motors

– Motors for explosive atmospheres

– Motors for food and beverage

– Motors for variable speed drives

– Permanent magnet motors

– Synchronous reluctance motors

– Traction motors

NEMA motors

– Low voltage motors

– High voltage induction and synchronous motors

– Marine motors

– Motors for explosive atmospheres

– Motors for variable speed drives

– Permanent magnet motors

– Servomotors

– Washdown motors

Generators

– Generators for wind turbines

– Generators for diesel and gas engine power plants

– Generators for steam and gas turbine power plants

– Generators for marine applications

– Generators for industrial applications

– Generators for traction applications

– Synchronous condensers for reactive power compensation

Mechanical power transmission components,

bearings, gearings

– Mounted bearings

– Enclosed gearing

– Mechanical drive components

– Couplings

– Sheaves and bushings

– Conveyor components

– Geared motor units

Life cycle services

ABB’s portfolio of drives

Optimal solution for you

Being able to rely on the continuous high performance and efficiency of your operations is something you want to take for granted. ABB variable frequency drives are made with all this in mind, established upon more than 40 years of experience and backed by a broad range of life cycle services.

ABB drives help you to optimize your processes and systems with state-of-the-art motor control technology, resulting in increased energy efficiency, better product quality, and reduced operating costs with higher output, less downtime, and reduced need for maintenance. All ABB drives are designed for easy selection, ordering, installation and use, and they offer integrated safety features, giving you more time to focus on what matters for you and your business.

Our portfolio offers low-voltage AC and DC drives, medium-voltage AC drives, and motion control drives spanning the fractional-kilowatt to multimegawatt power level. There is a drive available for essentially every industry and application and for all types of motors, in environments ranging from water utility facilities to clean electrical rooms, and to harsh coal mines and windy offshore platforms to food and beverage production. This wide product range allows you to select the best-fitting drive solution, providing maximum reliability and efficiency for every need.

Contact us

www.sogears.com

Mobile:+86-18563806647

Whatsapp/Wechat: +8618563806647

E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.; Skype ID: qingdao411

 

Premium Efficiency 3 Phase Induction Electric Moto...
Process performance IE3 cast iron motors
 

Comments

No comments made yet. Be the first to submit a comment
Guest
Thursday, 16 September 2021

Captcha Image

By accepting you will be accessing a service provided by a third-party external to https://www.guomaodrive.com/

Contact Us Now!

NER GROUP CO.,LIMITED

Yantai Bonway Manufacturer Co., Ltd

Tel:+86-535-6330966

Mobile:+86-18563806647

Whatsapp/Wechat: 008618563806647

https://twitter.com/gearboxmotor

https://www.facebook.com/sogears1993

https://www.youtube.com/c/Gearmotors

E-mail:inquiry@sogears.com; Skype ID: qingdao411

Industrial gearbox manufacturer in China

As a Industrial gearbox manufacturer in China, We offer the international standard high quality gear speed reducer and reduction gearbox who has the big stock house to guarantee the prompt delivery Depending on the professional industry field solution, excellent industry field achievement and the leading technology application in Hoist&Crane, Sugar&Paper, Coal&Mining, Rubber&Plastic, Packing&Conveyors, Energy&Fans&Pumps, Cement&Construction, Sawmills&Wood Mills, Food&Butchering&Pharma, Chemical&Boilers&Ceramic, Recycling&Sewage disposal, Steel&Rolling Mill&Metallurgy, Textile&Ginning&Leather working and so on.