WP worm gearbox reducer in stock is developed on the basis of WD reducer. The worm is made of 45# high-quality steel by heat treatment. The worm wheel is made of tin bronze. The wear resistance is good, especially in the bearing capacity. The worm gearbox reducer in stock is mainly used for the reduction transmission of various mechanical equipments such as plastics, metallurgy, beverages, mining, lifting and transportation, and chemical construction.
2, can get a larger transmission ratio with a single-stage transmission, compact structure, most models of the reducer have better self-locking, can save the brake device for mechanical equipment with braking requirements
5, good interoperability, worm gears are manufactured according to national standards, bearings, oil seals, etc. are used standard parts.
6, the box type has a basic type (the box is a vertical or horizontal structure with a foot plate) and a universal type (the box is a rectangular parallelepiped, with multiple fixed holes, no bottom plate or another bottom) Various types of structure such as foot board)
When the working environment temperature is higher than 40 °C, cooling measures must be taken.
Do not hard knock when installed, slowly drive the two shafts to make them engage.
2, installation method: 1 base installation, 2 flange installation, 30,000 can be installed.
4, reduction ratio: 1 basic type (single stage) 1:10--1:60, 2 combination type (two-stage) up to 1:3600, 3 combination of three or more levels is larger.
5, motor power (input): 0.12KW--15KW
With Best Regards,
Lee ( Sales Department; Miss. )
NER GROUP CO.,LIMITED
Yantai Bonway Manufacturer Co., Ltd
By accepting you will be accessing a service provided by a third-party external to https://www.guomaodrive.com/