1. Rv worm gearbox speed reducer is a power transmission mechanism that uses a gear speed converter to decelerate the number of revolutions of the motor (motor) to the required number of revolutions and obtain a mechanism with a large torque. In the mechanism for transmitting power and motion, the range of applications of the reducer is quite extensive.

2. Rv worm gearbox speed reducer can be seen in the transmission system of various types of machinery, from ships, cars, locomotives, heavy machinery for construction, processing equipment and automatic production equipment used in the machinery industry, to household appliances that are common in daily life. , clocks, etc.

   

3. Rv worm gearbox speed reducer application can be seen from the transmission of large power, to small loads, accurate angular transmission can be seen in the application of the reducer, and in industrial applications, the reducer has the function of deceleration and increased torque. Therefore, it is widely used in speed and torque conversion equipment.

4. The main functions of the Rv worm gearbox speed reducer are:

Reduce the speed and increase the output torque at the same time. The torque output ratio is multiplied by the motor output and the reduction ratio, but it should be noted that the rated torque of the reducer cannot be exceeded.

Deceleration also reduces the inertia of the load, and the reduction in inertia is the square of the reduction ratio. You can see that the general motor has an inertia value.

5. The basic structure of the Rv worm gearbox speed reducer is mainly composed of the transmission parts worm gear, shaft, bearing, box and its accessories. Can be divided into three basic structural parts: box, worm gear, bearing and shaft combination. The box is the base of all the accessories in the worm gear reducer. It is an important part that supports the fixed shaft parts, ensures the correct relative position of the transmission parts and supports the load acting on the reducer. The main function of the worm gear is to transmit the motion and power between the two staggered shafts. The main function of the bearing and the shaft is power transmission, operation and efficiency.

   

With Best Regards,

Candy Hao ( Sales Department; Miss. )  

NER GROUP CO.,LIMITED

Yantai Bonway Manufacturer Co., Ltd                                      

Tel:+86-535-6330966

Mobile:+86-15192224647

http://www.sogears.com/

https://twitter.com/gearboxmotor

https://www.facebook.com/sogears1993

Viber/Line/Whatsapp/Wechat: 008615192224647

E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.; Skepy ID:candy_4681

Add:No.5 Wanshoushan Road Yantai city Shandong Province, China（264006）