The filter press with Industry Three phase AC Induction Brake Electric Motor uses a special filter medium to apply a certain pressure to the object, so that a mechanical device that oozes out the liquid is a commonly used solid-liquid separation device. It was used in chemical production in the early 18th century and is still widely used in chemical, pharmaceutical, metallurgical, dye, food, brewing, ceramics and environmental protection industries.
The hydraulic compression mechanism of the filter press with Industry Three phase AC Induction Brake Electric Motor consists of a hydraulic station, a cylinder, a piston, a piston rod, and a Hafland card hydraulic station connected to the pressure plate. The motor, the oil pump and the relief valve are adjusted. Valves, pressure gauges, oil circuits, fuel tanks.
Filtration method: The flow of the filtrate is clearly divided into flow filtration and dark flow filtration. For the clear flow filtration, a water nozzle is arranged on the lower liquid outlet of each filter plate, and the filtrate flows out intuitively from the water nozzle. Under the dark flow filtration, a liquid outlet hole is arranged below each filter plate, and the liquid outlet holes of the plurality of filter plates are connected into one liquid outlet passage, which is discharged by a pipe connected by the liquid outlet hole below the thrust plate.
Washing method: When the filter cake needs to be washed, it sometimes flows in one-way washing and two-way washing, undercurrent one-way washing and two-way washing.
Installation and commissioning:
5.Hydraulic filter press with Industry Three phase AC Induction Brake Electric Motor , hydraulic station fuel tank into the clean 20 #-40 # hydraulic mechanical oil, the use of temperature >-5 ° C; if the ambient temperature is low, you can choose a similar viscosity, low freezing point hydraulic oil. Hydraulic oil must be added via an 80-100 mesh screen.
6, mechanical or hydraulic compression device, the power to start the motor should work correctly. When the hydraulic pressure is pressed and pressurized, the pressure gauge should rise steadily, and the hydraulic system should have no leakage. The working pressure of the hydraulic station should be adjusted according to the size of the model. If the oil tank is found to be insufficient after the test, it must be replenished.
With Best Regards,
Cherry Zhang ( Sales Department; Miss. )
NER GROUP CO.,LIMITED
Yantai Bonway Manufacturer Co., Ltd
Add:No.5 Wanshoushan Road Yantai city Shandong Province, China